In-depth guides on epoxy coatings and polished concrete — what lasts, what doesn't, what things cost, and how to choose. Written by the crew that installs them across the Mountain West.
Two of the toughest floor finishes — built very differently. A deep comparison on durability, looks, cost, and upkeep to help you choose right.
Quotes vary widely — and the cheapest one is rarely the best value. What actually drives the price, what to watch out for, and how to read a quote.
A peeling epoxy floor almost always traces back to one thing that happened before the first coat went down.
What polished concrete really is, how the process works, grit levels explained, where it excels, where it doesn't, and everything else worth knowing.
Three popular epoxy looks, three different personalities. A deep dive on how each compares — and how to pick the one you'll love in ten years.
These two coatings are constantly compared — but the best floors often use both. A complete breakdown of what sets them apart and why they work so well together.
A few simple habits make the difference between a floor that looks new at year ten and one that doesn't. The complete maintenance guide for both finishes.
A little preparation before the crew arrives makes the whole job go smoother. Here's exactly what to do before your epoxy floor installation.
Basement epoxy is more involved than a garage — mostly because of moisture. Here's what makes below-grade floors different and how to get it done right.
The answer varies a lot depending on the system, the prep, and how the floor is used. Here's the honest breakdown by system type.
Sometimes yes, sometimes no — and getting it wrong means paying twice. How to assess whether your existing floor is a candidate for recoating.
Cracks, spalling, oil stains, old coatings — most concrete problems are fixable. An honest guide to what can be repaired, how it's done, and where the limits are.
Facility managers have three serious options. A direct comparison across durability, maintenance, downtime, cost, and specific use cases.
Working with government agencies is different from commercial work. Here's how the process works — from SAM registration through bid award and project closeout.
The floor is one of the most regulated surfaces in a facility. What OSHA requires and what best practices look like beyond compliance.
Freeze-thaw cycles, road salt, hot tires on cold floors — what the Mountain West winters do to epoxy floors and how to protect yours.
Temperature, humidity, and cure conditions all affect how an epoxy floor turns out. Here's when conditions in Utah are best — and how to plan around the calendar.
If you've had an epoxy floor fail before, you're skeptical — rightly so. The honest postmortem on why floors fail and what specifically prevents it.
'It's slippery.' 'It yellows.' 'It always peels.' Some of these are true for some products. None of them are inevitable with a quality system.
A well-written flooring spec is the foundation of a successful project — and a poorly written one leads to disputes and disappointing results.
The difference between a floor that lasts twenty years and one that peels in two often comes down to who installed it. How to evaluate a contractor before signing.
We install epoxy coatings and polished concrete across the Mountain West. Tell us about your space and we'll send a no-pressure estimate.
Request a free estimate